Echo GT-2000R LUBRICATION

20

LUBRICATION

Level 1.

Tools Required: 8mm Open End Wrench, Screwdriver, Clean Rag.

Parts Required: ECHO® LUBETM 8 oz. (P/N 91014) or Lithium Base Grease.

1.Remove plastic shield.

2.Loosen bearing housing locating screw (A), at the top of the housing, remove mounting screw (B).

3.Pull the flexible drive shaft (C) from the housing, wipe clean and recoat with a thin coating [1/2 oz. (15 ml)] of grease.

4.Slide the flexible drive shaft back in the drive housing being careful not to get dirt on the flexible drive shaft.

5.Install the bearing housing and shield.