GT-230ASSEMBLY

ASSEMBLY

Plastic Shield Installaion

Parts Required:

Nylon Trimmer Head, Plastic Shield

 

Assembly.

 

 

 

 

 

 

 

 

 

 

 

 

Cut-off knife on debris shield has sharp edges. Avoid contact when installing or removing line head.

Wear Gloves or personal injury may result:

Cutoff knife is sharp.

Gearcase and surrounding area may be hot.

1.Remove wing nut (A), washer (B), and bolt (C).

2.Snap the shield over the bearing housing.

3.Install bolt (C), washer (B), and wing nut (A).

Nylon Line Head Installation

1.Remove plastic threaded shaft sleeve from threaded PTO shaft.

2.Align locating hole in upper plate with hole in bearing housing and insert 5 mm (3/16 in.) diameter locking tool (D).

3.Thread cutting attachment onto shaft clockwise until head is tight.

B

AC

D

Remember to remove the locking tool.

Semi-automatic nylon line heads must be used only with plastic debris shield with cut-off knife.

X7702094205

13

© 09/2013 ECHO Inc.

Page 13
Image 13
Echo GT-230 specifications Assembly, Plastic Shield Installaion, Nylon Line Head Installation