GT-230

MAINTENANCE

 

 

Nylon Line Replacement

1.Cut one piece of line to recommended length.

.080 (2.0 mm) dia. – 20’ (6 m)

.095 (2.4 mm) dia. – 20’ (6 m)

2.Align arrows on top of knob with openings in eyelets.

3.Insert one end of trimmer line into an eyelet, and push line equal distance through trimmer head.

4.Hold trimmer head while turning knob clockwise to wind line onto spool until about 5” (13 cm) of each line remains exposed.

Trimmer head is now fully loaded and ready for operation.

When the wear indicators located at the bottom of the Speed-Feed® head are worn smooth, or if holes appear, replacement of the cover or the entire Speed-Feed® head is required.

X7702094205

© 09/2013 ECHO Inc.

Wear Indicators

25

Page 25
Image 25
Echo GT-230 specifications Nylon Line Replacement, Trimmer head is now fully loaded and ready for operation