MAINTENANCE

HC-152

 

 

4.Inspect heat shield, and replace if damaged.

5.Install heat shield and muffler.

6.Tighten muffler mounting bolts (or nuts) to 80-95 in•lbf (90-110 kgf•cm).

7.Install engine cover and attach spark plug lead.

8.Start engine, and warm to operating temperature.

9.Stop engine, and re-tighten mounting bolts (or nuts) to specifications.

Carburetor Adjustment

The blades must not move at idle, otherwise serious personal injury may result. Periodic carburetor adjustment may be necessary to assure blades do not move at idle.

If blades move, readjust carburetor according to these instructions, or see your ECHO Dealer.

Engine Break-In

New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break-in period your engine performance will increase and exhaust emissions will stabilize. Idle speed can be adjusted as required.

High Altitude Operation

This engine has been factory adjusted to maintain satisfactory starting, emission, and durability performance up to 1,100 feet above sea level (ASL) (96.0 kPa). To maintain proper engine operation and emission compliance above 1,100 feet ASL the carburetor may need to be adjusted by an authorized ECHO service dealer.

If the engine is adjusted for operation above 1,100 feet ASL, the carburetor must be re-adjusted when operating the engine below 1,100 feet ASL, otherwise severe engine damage may result.

Level 2.

Parts Required: None

Note: Every unit is run at the factory and the carburetor is set in compliance with emission regulations. Carburetor adjustments, other than idle speed, must be performed by an authorized ECHO dealer.

1.Check idle speed and reset if necessary. If a tachometer is available, idle speed screw (H) should be set to the specifications found on “Specifications” page of this manual. Turn idle screw (H) clockwise to increase idle speed; counter clockwise to decrease idle speed.

When carburetor adjustment is completed, the cutting attachment should not move at idle, otherwise serious personal injury may result.

H

24

X7532249501

© 4/2013 ECHO Inc.

Page 23 Page 25
Page 24
Image 24
Echo HC-152 specifications Carburetor Adjustment, Engine Break-In, High Altitude Operation
Page 23 Page 25

HC-152 specifications

The Echo HC-152 is a revolutionary handheld tool that has garnered attention in the landscaping and gardening industry for its impressive capabilities and user-friendly design. Engineered with powerful technology, the HC-152 stands out for its efficiency and versatility, making it an essential addition to any garden tool collection.

One of the main features of the Echo HC-152 is its robust engine. It is equipped with a high-performance 21.2 cc two-stroke engine that delivers exceptional power and reliability. This engine is designed to provide a strong torque output, making it effective for various tasks, including trimming, edging, and light brush clearing. Its easy starting mechanism allows users to get to work quickly without the frustration commonly associated with starting two-stroke engines.

The HC-152 also boasts a user-friendly design that caters to both professionals and casual users. Its lightweight construction makes it easy to maneuver, reducing user fatigue during longer work sessions. The curved shaft design plays a crucial role in enhancing the tool's balance and control, allowing users to access tight spaces and navigate around obstacles with ease.

In terms of technology, the Echo HC-152 features intelligent fuel consumption management, which not only maximizes operational efficiency but also reduces emissions. The tool is manufactured with lower emissions in mind, meeting environmental regulations and helping users contribute to a greener planet. This commitment to sustainability does not compromise performance, as users can still expect consistent results from the HC-152.

Comfort is another key characteristic of the HC-152. The tool is designed with ergonomics in mind, featuring vibration-dampening handle grips that enhance user comfort, allowing for extended periods of use without discomfort. The inclusion of a safety guard ensures that users can operate the trimmer safely, protecting them from debris while working.

Lastly, the Echo HC-152 is compatible with a range of accessories, providing users with the flexibility to tackle various tasks. This adaptability makes the tool an asset for landscaping professionals and DIY gardeners alike, as it can effectively handle projects of differing sizes and complexities.

In summary, the Echo HC-152 is a standout tool characterized by its powerful engine, user-friendly design, advanced technology, and ergonomic features. It offers versatility and efficiency to users, making it a reliable choice for anyone looking to maintain their lawn and garden effectively. With its commitment to performance and sustainability, the HC-152 continues to be a preferred choice among gardening enthusiasts and professionals.
Top Page Image Contents