Hedge Clipper 19

Operator's Manual

1.Remove spark plug lead.

2.Remove muffler cover (2 screws).

3.Remove starter cover (7 screws).

4.Use brush to remove dirt from cylinder fins.

IMPORTANT

DO NOT use a metal scraper to remove dirt from the cylinder fins.

5. Assemble components in reverse order.

exhaust system

Spark Arrestor Screen

Level 2.

Tools required: 3 mm Hex wrench, Cross Head Screwdriver, Soft metal brush

Parts required: Screen, Gasket

1.Remove spark plug lead from spark plug, and remove engine or muffler cover. (2 screws)

2.Place piston at Top Dead Center (TDC) to prevent carbon/dirt from entering cylinder.

3.Remove exhaust guide (A), gasket (B), and screen (C) from muffler body. (5 screws)

4.Clean carbon deposits from muffler components.

NOTE

When cleaning carbon deposits, be careful not to damage the catalytic element inside muffler.

5.Replace screen if it is cracked, plugged or has holes burned through.

6.Install engine cover or muffler cover and attach spark plug lead.

C

B

A