Echo HC-155 blade adjustment

blade adjustment

Level 2.

Tools Required: 8 mm Socket & Extension, 4mm Hex Wrench w/ extension

1.Move stop switch to STOP position.

2.Disconnect spark plug wire.

WARNING

Hedge clipper blades are very sharp. Touching them may lead to severe personal injury. Use long hex wrenches and sockets with extensions when tightening blade screws and blade locknuts to keep hands at a safe distance from sharp blades.

3.Tighten blade screws (A) securely.

4.Hold blade screws (A) to prevent turning, and tighten locknuts (B).

Contents

WARNING 01/10 Introduction the operator’s manual the safety manual Table of Contents Safety manual safety symbols and important information international symbols personal condition and safety equipment Physical Condition Eye Protection Hand Protection Hearing Protection Repetitive Stress Injuries Read the Manuals Clear the Work Area Keep a Firm Grip Keep a Solid Stance equipment check Emission Control (exhaust & evaporative) EPA 2010 and Later and/or C.A.R.B. TIER Description Right Front Handle Guard Hot Decal (near muffler) FRONT HANDLE WITH GUARD BLADES BLADE STIFFENER SPARK PLUG CHOKE Contents Assembly blade stiffener removal install blade stiffener Operation fuel Fuel Requirements Handling Fuel starting cold engine starting warm engine stopping engine hedge trimming Maintenance skill levels maintenance intervals air filter fuel filter spark plug cooling system exhaust system Spark Arrestor Screen Exhaust Port Cleaning carburetor adjustment Engine Break-In High Altitude Operation lubrication Blades Gear Box Assembly sharpening blades blade adjustment Troubleshooting Storage Long Term Storage (over 30 days) Specifications Warranty Statements Page Page notes Servicing Information parts/serial number service echo consumer product support warranty registration additional or replacement manuals