22

1.Move stop switch to stop position.

2.Disconnect spark plug wire from spark plug.

3. Brush loose debris from blade and coat both sides of blade with the 50-50 cleaning mixture.

4. Allow cleaning mixture to soften the remaining gummy residue then wipe it from the blade.

5. Apply clean oil to the entire length of the blade. Be certain the blade bolts are lubricated.

6.Wipe excess oil from the blade before putting the unit back in ser- vice.

Gear Box Assembly

Level 1.

Tools required: Grease Gun , Clean rag

Parts required: POWER BLENDXTM 14oz. (P/N 91015) or Lithium

Based Grease.

1. Clean dirt from the grease fitting (A).

2.Carefully pump grease into fitting (A). DO NOT force grease. Too much pressure will force grease past seals and cause damage. Apply 1-2 pumps of grease every 15-25 hours of operation.

3.Wipe excess grease from around grease fitting.

A