ASSEMBLY |
ASSEMBLY
This model is factory assembled.
Note: For Normal cutting, Echo strongly recommends the blade guard be installed. In extreme conditions, such as commercial cutting or when cutting thick and/or dense branches, efficiency may be increased by trimming without the blade guard.
Parts Required: Blade Guard, Blade Lock Nuts
Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always wear gloves to protect hands.
Follow blade bolt adjustment instructions exactly. Failure to do so could result in damage to blades or gearbox.
Remove Blade Guard
1.Move stop switch to stop position
2.Disconnect spark plug wire.
Hedge clipper blades are very sharp. Touching them may lead to severe personal injury. Use a socket and extension when adjusting blade bolts or blade locknuts in order to keep hands at a safe distance from sharp blades.
3.Remove blade guard locknuts (A).
4.Remove blade guard
Note: Assure blade bolts (B) are tightened securely.
5. Secure blades with new locknuts (A).
Note: Use new locknuts every time blade guard is installed or removed.
A
B
14 | X7502255307 |
© 9/2013 ECHO Inc.
