Echo HC-165/185 specifications Equipment

SAFETY HC-165/185

Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death.

Read the Manuals

•Provide all users of this equipment with the Operator’s Manual and Safety Manual for instructions on Safe Operation.

Clear the Work Area

•Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use.

Keep a Firm Grip

•Always hold throttle handle and support handle with thumbs and fingers tightly encircling the handles.

Keep a Solid Stance

•Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach.

Avoid Hot Surfaces

•Keep exhaust area clear of flammable debris. Avoid contact during and immediately after operation.

For more information scan this QR code.

Never perform blade maintenance procedures while engine is running.

Equipment

Use only ECHO approved attachments. Serious injury may result from the use of a non-approved attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety manual.

•Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.

•Check that the cutting attachment is firmly attached and in safe operating condition. Dull, loose or damaged blades should not be used.

8 X7502255307

© 9/2013 ECHO Inc.