Hedge Clipper 21

Operator's Manual

lubrication

Blades

Level 1.

Tools required: Clean rag, 25 or 50 mm (1 or 2 in.) cleaning brush

Parts required: 20W Engine Oil (lubrication), 50-50 mixture of kerosene and 20W oil (cleaning).

WARNING

Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always wear gloves to protect hands.

1.Move stop switch to stop position.

2.Disconnect spark plug wire from spark plug.

3.Brush loose debris from blade and coat both sides of blade with the 50-50 cleaning mixture.

4.Allow cleaning mixture to soften the remaining gummy residue then wipe it from the blade.

5.Apply clean oil to the entire length of the blade. Be certain the blade bolts are lubricated.

6.Wipe excess oil from the blade before putting the unit back in ser- vice.