Echo P-953 manual Bass Control

4BASS CONTROL

To adjust the bass level (Equalizer function inactive), first select the Bass mode by pressing the SEL button 3 so the BAS indication appears on the display panel. Within 5 seconds of choosing the Bass mode, press the AUDIO CONTROL 2 button to decrease the bass response, or the AUDIO CONTROL button to increase it as desired. The level will be shown on the display panel from a minimum BAS --10to a maximum of BAS 10 (BAS 00 indicates flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

5TREBLE CONTROL

To adjust the treble level (Equalizer function inactive), first select the Treble mode by pressing the SEL button 3 so the TRB indication appears on the display panel. Within 5 seconds of choosing the Treble mode, press the AUDIO CONTROL button

2to decrease the treble response or the AUDIO CONTROL button to increase it as desired. The level will be shown on the display panel from a minimum TRB --10to a maximum of TRB 10 (TRB 00 indicates flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

6LEFT/RIGHT BALANCE CONTROL

To adjust the left-right speaker balance, first select the Balance mode by pressing the SEL button 3 so the BAL indication appears on the display panel. Within 5 seconds of choosing the Balance mode,

press the AUDIO CONTROL button 2 to adjust the stereo balance to the left channel speakers or the AUDIO CONTROL button to adjust it to the right channel speakers. The balance position will be shown on the display panel from BAL 10L (full left) to BAL

10R (full right). When the volume level between the left and right speakers is equal, BAL L=R will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

7FRONT/REAR FADER CONTROL

To adjust the front-rear speaker balance, first select the Fader mode by pressing the SEL button 3 so the FAD indication appears on the display panel. Within 5 seconds of choosing the Fader mode, press the AUDIO CONTROL button 2 to adjust the front-rear speaker balance to the front speakers or the AUDIO CONTROL button to adjust it to the rear speakers. The fader position will be shown on the display panel from FAD 10R (full rear) to FAD 10F (full front). When the level between the front and rear speakers is equal, FAD F=R will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

8LOUDNESS CONTOUR (LOUD)

When listening to music at low volume levels, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. Press and hold the BAND/LOUD button for 2 seconds to activate this feature; the unit will beep and LOUD ON will appear on the display for 5 seconds. Pressing the button again for 2 seconds will deactivate the feature; the unit will beep and LOUD OFF will appear on the display panel for 5 seconds.

9AUDIO MUTE SELECTOR (MUTE)

Press this button momentarily to mute the volume from the system (MUTE will appear blinking on the display panel). Pressing the button again or activating any other button/function will return to the volume level setting in use before the Mute function was activated. During

-4-