Echo P-953 manual Setting the Clock

NOTES ON USE OF REMOTE INPUT JACK:

The remote input jack provides the user option of applying an external audio source to the radio.The audio jack is compatible with most "Walkman" CD and cassette players, or an MP3 digital audio playback unit. When the external source is connected, only that media is played by the radio; no other input sources (radio or CD) are operative.

THEFT DETERRENT

DISC SLOTLED (31)RESET BUTTON (32)

(19)

MOUNTING PLATE

GUIDE (2 PLACES)

PANEL MOUNT-	CD EJECT	FRONT PANEL
ING PLATE	BUTTON (27)

SETTING THE CLOCK

1.Switch the vehicle ignition and radio “on”.

2.Press the Display (T/F) button to call the time display; then press and hold the button until a beep tone occurs and the time display flashes.

3.While the display is flashing, press the Up TUNE/SEEK/TRACK ( ) button to adjust the hours and A or P indication, or the

Down TUNE/SEEK/TRACK ( ) button to adjust the minutes to the correct time.

4.Five seconds after the last hour or minute adjustment is made, the time will be set in the unit and the display will return to the normal indication.

CD PLAYER ERROR CODES

If a problem should develop while operating the CD player, an error code (ER-1, ER-2, ER-3, etc.) may appear on the display panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor control of the player. If an error code should appear, try ejecting and reloading the disc into the player. While the disc is out of the unit, make sure it is clean, undamaged, and loaded correctly (label surface up). You may also try activating the RESET button dn on the unit, but this will also erase the time and pre-set memories.

If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.

-9-