8

1.STOP SWITCH - "SLIDE SWITCH" mounted on top of handle. Push forward to start and run. Slide back to stop.

2.THROTTLE TRIGGER - Spring loaded to return to idle when released. During acceleration, press trigger gradually for best operating technique.

3.SPARKARRESTOR-CATALYTICMUFFLER/MUFFLER-Themufflerorcatalyticmufflercontrolsexhaustnoise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the muffler. Keep exhaust area clear of flammable debris.

4.SPARK PLUG - Provides spark to ignite fuel mixture.

5.RECOIL STARTER HANDLE- Pull recoil handle slowly until recoil starter engages, then quickly and firmly. When engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.

6.FUEL TANK CAP - Covers and seals fuel tank.

7.AIRCLEANER-Containsreplaceableairfilterelement.

8.THROTTLE POSITION LEVER -Pull back to increase engine speed. Friction washers maintain throttle lever setting.

9.PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump purge bulb an additional 4 or 5 times..

10.CHOKE - Choke is located on top of the air cleaner. Move choke lever to "COLD START" ( ) to close choke for cold start. Move choke lever to "RUN" ( ) position to open choke.

11.BLOWERPIPES-Twist lock design.

CONTENTS

1 - Power Head

1 - Straight Pipe

1 - Fan Head Pipe

1 - Operator's Manual

1 - Warranty Registration Card

1- ECHO Emissions and Warranty Statement

1- Echo Power Blend TM 2-stroke oil sample