| OPERATION | ||
Starting Warm Engine |
|
| |
The starting procedure is the same as Cold Start except DO |
|
| |
NOT close the choke. |
| A | |
1. | Stop Switch | B |
|
| Move stop switch (A) away from the STOP position. |
|
|
2. | Throttle Position Lever |
|
|
| Move throttle position lever (B) midway between idle and full |
|
|
| throttle positions. |
|
|
3. | Purge Bulb |
|
|
| Pump purge bulb (D) until fuel is visible and flows freely in the |
|
|
| clear fuel tank return line. |
|
|
|
|
| D |
4. | Recoil Starter |
|
|
| Place the unit on a flat, clear area. Firmly grasp throttle grip |
|
|
| with left hand and rapidly pull recoil starter handle/rope (E) |
|
|
| until engine fires. |
|
|
Recoil starter: Use short pulls - only 1/2 ~ 2/3 of rope for |
|
| |
starting. Do not allow the rope to snap back in. Always hold the | E |
| |
unit firmly. |
| ||
Note: If engine does not start after 5 pulls, use Cold Start |
|
| |
| Procedure. |
|
|
Stopping Engine |
| A | |
|
|
| |
1. Throttle Trigger/Throttle Position Lever | B | F | |
| Release throttle trigger (F). Move throttle position lever (B) | ||
|
| ||
|
|
| |
| forward to idle position and allow engine to return to idle |
|
|
| before shutting off engine. |
|
|
2. Stop Switch
Move stop switch (A) to STOP position.
If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using trimmer again.
X7501183502 | 17 |
© 4/2013 ECHO Inc.