Echo PB-46HT, PB-46LN, PB-60HT, PB-46LN, PB-46HT ASSEMBLY, INSTALL BLOWER PIPES, INSTALL STICK HANDLE

12

ASSEMBLY

WARNING DANGER

Never perform maintenance or assembly procedures with engine running or serious personal injury may result.

INSTALL BLOWER PIPES

1.Assemble clamp (A) onto both ends of flexible pipe (B).

2.Assemble straight pipe with swivel (C) into flexible pipe (B) and tighten clamp (A).

3.Assemble flexible pipe (B) to elbow (D) on blower and tighten clamp (A).

4.Assemble straight pipe (E) to pipe with swivel (C), turning straight pipe clockwise to lock in place.

5.Assemble curved pipe (F) to straight pipe (E) turning curved pipe clockwise to lock in place.

INSTALL STICK HANDLE

1.Remove blower pipe from swivel tube (C).

2.Loosen wing nut (G) completely and expand open stick handle clamp (H).

3.Align notches (J) in handle clamp with pipe pegs (K). Handle should be angled away from operator.

4.Slide handle onto swivel tube (C).

5.Position handle for comfortable operation and tighten wing nut

(G).

C

E

F

6.Install blower pipe to swivel tube.