16

1.Use only during appropriate hours.

2.Make sure bevel at end of pipe faces downward.

3.Allow the engine to warm up at a fast idle for a few minutes.

4.Set engine speed with throttle (A).

NOTE

The blower can be run at any speed between 2600 rpm to 6600 rpm (PB-46HT/LN); 7600 rpm (PB-60HT) once the engine has broken in after approximately 3 fuel tanks of running time.

5.Use lower speed to blow dry leaves from a lawn or flower bed.

6.Additional speed may be necessary to clean grass and leaves from walks, patios and drives.

7.Higher speed may be necessary to move gravel, dirt, snow, bottles or cans from a driveway, street, parking lot or stadium.

NOTE

Never use a higher speed setting than necessary to perform a task. Remember, the higher the engine speed, the louder the blower noise. Minimize dust by using blower at lower speeds and by dampening material with water/mist when necessary. Keep debris on your property.

Be Smart - be a good neighbor.

A