Power Blower 13
Operator's Manual
starting warm engine
The starting procedure is the same as Cold Start except DO NOT close the choke.
A
1. Throttle Position/Stop Switch Button
Slide Throttle Position /Stop Switch Button (A) back to idle posi-
tion (first detent away from stop position).
2.Purge Bulb
Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times.
3.Recoil Starter
Pull recoil starter handle (D) and engine should start.
| C |
|
|
|
|
| |
NOTE |
|
|
|
If engine does not start after 5 pulls, use cold start procedures. | D |
| |
|
|
|
|
|
|
|
|
stopping engine
1. | Throttle Position/Stop Switch Button |
| |
A | |||
| Release throttle trigger. Move Throttle Position /Stop Switch But- | ||
| ton (A) forward to idle position (first detent away from stop posi- |
| |
| tion) and allow engine to return to idle before shutting off engine. |
| |
2. | Throttle Position/Stop Switch Button |
| |
| Move Throttle Position /Stop Switch Button (A) all the way for- |
| |
| ward to STOP position. |
|
WARNING
If engine does not stop when stop switch is moved to STOP posi- tion, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using blower again.