Echo PE-225 manual Contents, Assembly drive shaft/power head, Power Edger, Operators Manual

Power Edger	9
Operator's Manual

Contents

The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, some assembly may be necessary.

After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.

*Some Echo units may be factory pre-assembled. The nylon line head, plastic debris shield, and mounting hardware shown in the contents list are pre-assembled to the unit. Assembly tools are not supplied with these units. The front handle may need to be re-positioned for comfortable operation.

___ 1, Power Head

___ 1, Drive Shaft Assembly

___ 1, Plastic Bag (Co-Pack)

___ 1, Operator's Manual

___ 1, Safety Manual

___ 1, Warranty Registration Card

___ 1, Echo Power Blend X TM 2-stroke oil sample

___ 2,	Split pin
___	Assembly Tool (s)
___ 1,	Safety Glasses

Assembly

drive shaft/power head

Parts Required: Power Head, Drive Shaft Assembly

1.Stand engine on a level surface.

2.Remove vinyl cap from drive shaft.

3.Loosen the two bolts (A) at drive shaft end of engine.

4.Carefully fit drive shaft assembly to engine, making sure that inner drive shaft engages into clutch mount.

NOTE

Rotate the drive shaft housing until edger housing is in line with the engine.

5.Tighten bolts (A).

A