Echo PE-230 manual Maintenance, skill level, maintenance intervals

16

Maintenance

WARNING

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all

openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces.

Your ECHO edger is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your edger achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed, see your ECHO Dealer for repairs.

skill level

Level 1 = Easy to do. Common tools may be required.

Level 2 = Moderate difficulty. Some specialized tools may be required.

ECHO offers REPOWERTM Maintenance Kits and Parts to make your maintenance job easier.

maintenance intervals

COMPONENT / SYSTEM	MAINTENANCE PROCEDURE	REQ'D	DAILY OR	EVERY	3 MONTHS	YEARLY 600
		SKILL	BEFORE	REFUEL	OR 90	HOURS
		LEVEL	USE		HOURS
Air Filter	Inspect/Clean	1	I / C *		R*
Choke	Inspect/Clean	1	I / C
Fuel Filter	Inspect	1			I *	I / R *
Fuel Cap Gasket	Inspect/Replace	1			I *	R *
Fuel System	Inspect/Replace	1	I (3) *	I (3) *
Spark Plug	Inspect/Clean	1			I / C / R *
Cooling System	Inspect/Clean	2	I / C
Muffler Spark Arrestor	Inspect/Clean/Replace	2			I / C / R *
Cylinder Exhaust Port	Inspect/Clean/Decarbon	2			I / C
Drive Shaft	Grease	2			I (1)
Gear Housing	Grease	2			I (2)
Blade Replacement	Inspect/Replace	1	I	I	I *
Recoil Starter Rope	Inspect/Clean	1	I / C *
Screws/Nuts/Bolts	Inspect/Tighten/Replace	1	I *

MAINTENANCE PROCEDURE LETTER CODES: I = INSPECT, R = REPLACE, C = CLEAN IMPORTANT NOTE - Time intervals shown are maximum. Actual use and your experience will determine the frequency of required maintenance.

MAINTENANCE PROCEDURE NOTES:

(1)Apply POWER BLENDXTM grease every 25 hours of use.

(2)Apply POWER BLENDXTM grease every 15 - 25 hours of use.

(3)Low evaporative fuel tanks DO NOT require regular maintenance to maintain emission integrity. * All recommendations to replace are based on the finding of damage or wear during inspection.