PPT-280

OPERATION

 

 

Starting Warm Engine

The starting procedure is the same as Cold Start except DO NOT close the choke, and do not depress throttle trigger to wide open position.

The attachment should not move at idle, otherwise serious personal injury may result.

A

Note: If attachment moves, readjust carburetor according to “Carburetor Adjustment” instructions in this manual or see your ECHO Dealer.

1.Stop Switch

Move stop switch button (A) forward away from the STOP position.

2.Purge Bulb

Pump purge bulb (C) until fuel is visible in the “Clear” fuel return line.

3.Recoil Starter

Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Rapidly pull the recoil starter handle (D) until the engine fires.

Note: If engine does not start after 5 pulls, use Cold Start Procedure.

C

D

Stopping Engine

1.Throttle

Release throttle and allow engine to return to idle before shutting off engine.

2.Stop Switch

Move stop switch button (A) backward to STOP position.

A

If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using unit again.

X7702091009

21

© 02/2014 ECHO Inc.

Page 21
Image 21
Echo PPT-280 specifications Starting Warm Engine, Stopping Engine