Echo SRM-210 - page 13

GRASS TRIMMER/BRUSH CUTTER

OPERATOR'S MANUAL 13

NYLON LINE INSTALLATION

Tools Required: None

Parts Required: Two (2) Pre-cut Nylon Line 8 in. X .095 in.

1. Shut engine off. Lay unit on the ground with head assembly up.

2. Remove old nylon line through center recess of head.

3. Thread new lines through outside holes (A) in housing until ends

meet in center of recess.

NOTE

Insert cutting line ends to center of head recess to insure easy

removal of used lines.

FRONT HANDLE INSTALLATION

Tools Required: Screwdriver.

1. Position front handle for comfortable operation and secure screws.

Contents

Main Grass Trimmer/Brush Cutter TABLE OF CONTENTS I THE OPERATOR'S MANUAL THE SAFETY MANUAL OPERATOR'S MANUAL 3 M ANUAL SAFETY S YMBOLS S Shaft Decal INTERNATIONAL SYMBOLS OPERATOR'S MANUAL 5 SAFETY INSTRUCTIONS PERSONAL CONDITION AND SAFETY EQUIPMENT Physical Condition Eye Protection Hand Protection EQUIPMENT OPERATOR'S MANUAL 7 E MISSION D CONTENTS Page Page OPERATOR'S MANUAL 11 S PLASTIC SHIELD INSTALLATION NYLON LINE HEAD INSTALLATION A Page PRE - OPERATION OPERATION WITH BLADES Preparing the Trimmer/Brush Cutter for Blade Use Light-Duty Use - Plastic, Nylon, or Metal Blades: Heavy-Duty Use - Plastic, Nylon, or Metal Blades: Page FUEL Fuel Requirements Mixing Instructions Handling Fuel After refueling OPERATOR'S MANUAL 17 O STARTING COLD ENGINE STARTING WARM ENGINE OPERATOR'S MANUAL 19 M MAINTENANCE INTERVALS Page SPARK PLUG COOLING SYSTEMS CLEANING Page Page OPERATOR'S MANUAL 25 CARBURETOR ADJUSTMENT Engine Break-In High Altitude Adjustment Idle Speed Adjustment Page SHARPENING METAL BLADES OPERATOR'S MANUAL 29 T WARNING DANGER S WARNING DANGER Long Term Storage (over 30 days) Page SERVICING INFORMATION PARTS SRM-210 SERVICE ECHO CONSUMER PRODUCT SUPPORT