4
Shaft DecalWARNING DANGER
• This unit can be dangerous and cause serious injury if improperly
used. To reduce injury risk to operator, helpers and bystanders,
read and understand the Operator's and Safety manuals.
• Blindness can occur from objects that are thrown or ricocheted even
with shield in place. Operators, helpers and bystanders must wear
ANSI Z87.1 approved eye protection.
• Always wear hearing protection when operating unit.
• Prevent accidental contact with unit and any cutting attachment.
Maintain a 15 m (50 ft.) radius, DANGER ZONE surrounding the
operator. ONLY the operator, dressed in proper protective clothing
should be in the DANGER ZONE.
• Beware of KICKOUT (blade thrust) when using blades. Special
precautions are necessary for blade operation, see your Operator's
and Safety Manuals. ONLY install ECHO approved blades on
Brush Cutters (SRM) models equipped with proper blade shield,
U-handles, harness, blade collar, nut and cotter pin.
• Blade/Cutting attachment does not stop immediately after releasing
throttle. Keep hands and feet clear of blade/cutting attachment
unless engine is shut off and cutting attachment is not moving.
• INSPECT BLADES BEFORE USE.
• DO NOT USE DAMAGED, CRACKED, BENT, DULL OR
IMPROPERLY SHARPENED BLADES.
• Do not remove shields, modify the unit or install attachments or
parts not approved by ECHO. Approved attachment information
and replacement Operator's and Safety Manuals are available from
your ECHO dealer or by writing: ECHO, INCORPORATED, 400
OAKWOOD RD., LAKE ZURICH, IL 60047.
Hot
Surface
Carburetor
Adjustment
- Idle speed
Carburetor
Adjustment
- High speed
mixture
DESCRIPTION SYMBOLSYMBOL
"WARNING, SEE
OPERATOR'S
MANUAL
Wear eye, ear
and head
protection
Emergency
Stop Fuel and oil
mixture
Finger Severing
Carburetor
Adjustment
- Low speed
mixture
Primer
Bulb
Ignition
ON/
OFF
Wear hand and
foot protection
Safety/Alert
Keep bystanders and helpers
away 15 m (50 ft.).
DO NOT smoke
near fuel.
DO NOT allow
flames or sparks
near fuel.

INTERNATIONAL SYMBOLS

DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTION
(P/N 89016054130)
Choke Control
"Cold Start"
Position
(Choke Closed)
Choke Control
"Run"
Position
(Choke Open)
Do not use
blades. String
line only