Echo SRM-211 - page 23

GRASS TRIMMER/BRUSH CUTTER

OPERATOR'S MANUAL 23

A

B

C

D

1. Disconnect spark plug lead from spark plug.

2. Release stored energy in power spring by removing spark plug.

3. Remove three (3) screws (A) from starter assembly and remove

starter.

NOTE

DO NOT disassemble the starter assembly.

4. Remove the four screws that retain the engine cover. Two at the

inside top of the mounting plate (B), one on the top guard (C), and

one at the muffler cover (D).

5. Disengage the heat deflector tabs (E) under the muffler from the

slots in the engine/muffler cover.

6. Lift the cover from the engine.

7. Reinstall spark plug and starter assembly to prevent dirt and debris

from entering engine and starter.

NOTE

When installing starter housing to mounting body, be sure that

drive starter cam engages the starter pawls correctly.

E

D

Contents

Main TABLE OF CONTENTS I THE OPERATOR'S MANUAL THE SAFETY MANUAL OPERATOR'S MANUAL 3 M ANUAL SAFETY S YMBOLS S Shaft Decal INTERNATIONAL SYMBOLS OPERATOR'S MANUAL 5 SAFETY INSTRUCTIONS PERSONAL CONDITION AND SAFETY EQUIPMENT EXTENDED OPERATION/EXTREME CONDITIONS Vibration and Cold Physical Condition EQUIPMENT OPERATOR'S MANUAL 7 E MISSION D CONTENTS Page Page OPERATOR'S MANUAL 11 S A PLASTIC SHIELD INSTALLATION OPERATOR'S MANUAL 13 PRE - OPERATION OPERATION WITH BLADES Preparing the Trimmer/Brush Cutter for Blade Use Choosing the Correct Blade Grass/Weed Blades Require: Page FUEL Fuel Requirements Mixing Instructions Handling Fuel After refueling OPERATOR'S MANUAL 17 O STARTING COLD ENGINE STARTING WARM ENGINE OPERATOR'S MANUAL 19 M MAINTENANCE INTERVALS Page SPARK PLUG COOLING SYSTEMS CLEANING Page Page OPERATOR'S MANUAL 25 CARBURETOR ADJUSTMENT Engine Break-In High Altitude Adjustment Idle Speed Adjustment Page SHARPENING METAL BLADES OPERATOR'S MANUAL 29 T WARNING DANGER S WARNING DANGER Long Term Storage (over 30 days) Page SERVICING INFORMATION PARTS SERVICE ECHO CONSUMER PRODUCT SUPPORT WARRANTY REGISTRATION