Echo SRM-225 To Advance Trimmer Line, Remove Nylon Line Head, Support Handle Installation

ASSEMBLY SRM-225

To Advance Trimmer Line

See Maintenance Section for nylon line replacement.

Note: To advance trimmer line, tap trimmer head against the ground while the head is turning at normal operating speed.

Remove Nylon Line Head

Note: Do not disassemble nylon line head.

1.Align locking hole in upper plate with notch in edge of gear housing and insert head locking tool (D).

2.Remove line head (E) by turning it clockwise until head is completely off of shaft.

3.Remove locking tool (D).

Support Handle Installation

Note: Label shows minimum spacing for support handle location

1.Position support handle for comfortable operation and secure screws.

D

E

MIN

SPACING

14 X7722271109

© 2/2014 ECHO Inc.