Right handle assembling bolt

Right handle assembling bracket

Right hand U-handle

To engine

Adjustment of right handle inclination (left/right)

Adjustment of right handle inclination (forward/ backward)

Adjustment of left handle inclination

 

(forward/ backward)

To engine

4

6

2

1

 

 

 

7

 

3

5

Loosen 4 right handle assembling bolts and insert right hand U-handle into right handle assembling bracket. (toward direction of arrow )

Fix the right hand U-handle by tightening 4 right handle assembling bolts lightly.

Adjust each inclination of right and left handles to adequate position (easy to operate) and tighten firmly handle assembling bolt (8 mm) and 4 right handle assembling bolts.

Determine “Easy to operate” position.

SHIELD

Fit the shield on the gear housing and tighten screws with washers (Seven points) as shown.

Shoulder strap assembly

Quick release latch

Waist pad

SHOULDER HARNESS

•Fit the shoulder starp to the swivel hook, and adjust the length of starp and or the locaion clamps to maintain the cutter head parallel to the ground.

6