Water Pump 19

Operator's Manual

NOTE

The throttle cable remains assembled to the engine cover and the spark plug lead and grommet remain installed.

IMPORTANT

DO NOT use a metal scraper to remove dirt from the cylinder fins.

3.Use the brush to remove dirt from the cylinder fins.

4.Remove grass and leaves from the grid between the starter and fuel tank.

5.When installing the cover, be certain the tab of the metal deflector shield is in the slot of the cover.

exhaust system

Spark Arrestor Screen

Level 2.

Tools Required: Cross-head Screwdriver, 3 mm Hex Wrench, Soft metal brush

Parts Required: Spark Arrestor Screen, Gasket

1.

Remove engine cover. See “Cleaning Cooling System” for step by

 

 

step instructions.

 

2.

Place piston at Top Dead Center (TDC) to prevent carbon/dirt from

 

 

entering cylinder.

 

3.

Remove screen cover (A), screen holder (B), gasket (C), and spark

 

 

arrestor screen (D) from muffler body.

 

4.

Clean carbon deposits from screen (D) and muffler components.

 

5.

Replace screen if it is cracked, plugged or has holes burned

 

 

through.

D

 

 

6.

Install spark arrestor screen, gaskets, and cover.

 

 

C

B

A