Echo WP-1000, WP-1000 T1E starting warm engine, stopping engine, cold weather operation

Water Pump 15

Operator's Manual

	starting warm engine
	starting warm engine	B
	The starting procedure is the same as Cold Start except DO NOT close	B

	the choke.

1.Move ignition switch (A) to start, move throttle lever (D) towards engine to idle position. Pull starter handle (E) and engine should start. Do not use choke (B).

	NOTE	E
	If engine does not start after 5 pulls, use Cold Start Procedure.	E
		C
		C

stopping engine

1.Move throttle lever (D) towards engine to idle position and allow engine to return to idle before shutting engine off.

2.Move ignition switch (A) to “Stop” position.

warning

If engine does not stop when stop switch is moved to STOP posi- tion, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using unit again.

cold weather operation

Pumps will not freeze when running. However, in freezing weather, remove drain plug (A) and prime port plug (B) and drain the water from pump completely after use. All hoses exposed to freezing temperatures should also be drained, Before restarting the pump, replace the drain plug and fill plug securely, making sure the gaskets are in place and in good condition to prevent air entry into the pump. Prime the pump.