IMPORTANT! The tie strap and spacer, and the bolts and washers must be removed from the bottom of the dome unit prior to installation. DO NOT REMOVE THE DOME COVER TO REMOVE THESE SHIPPING RESTRAINTS.
YOU MUST PLUG THE SHIPPING BOLT HOLES WITH THE SUPPLIED PLUGS (ATTACHED TO TIE STRAP SHIPPING RESTRAINT).
2.Remove and discard the tie strap and spacer (KEEP RUBBER PLUGS), and the (2) bolts and (2) washers that pass through the bottom of the base (Fig. 5).
3.Insert provided plugs into holes that were occupied by the shipping bolts. Inserted plugs should be flush with base (Fig. 5).
Fig. 5
IMPORTANT!
After removing shipping bolts, firmly insert plugs into holes. Plugs should be flush with base.
IMPORTANT!
Remove and discard Tie Strap and Plastic Spacer prior to installation.
KEEP RUBBER
PLUGS.
IMPORTANT!
Remove and discard Bolts and Washers prior to installation.
Page 5
