SECTION 3 | INSTALLATION |
| |
|
|
TOOLS AND MATERIALS REQUIRED:
-drill and drill bit set
-tape measure
-7/16” open end wrench (coax connections)
-adhesive sealant (compatible with roof material)
-appropriate fasteners to install all components and wiring
-5/32” allen wrench, channel lock or pliers (to remove shipping bolts)
-wire cutter (to remove shipping tie strap)
KIT CONTENTS:
1.Unpack and identify all components (Fig. 4).
Fig. 4
KING CONTROLS
KING DOME
OPERATING INSTRUCTIONS
1.Turn on TV
2.Go to signal meter screen and choose transponder number for dish or direct tv.
3.Enter local zip code on signal meter screen to determine satellite elevation..
4.Press UP arrow to turn King Dome on.
5.Press UP or DOWN arrow to display dish elevator and match to elevation on signal meter screen on tv.
6.Press and hold RIGHT arrow for 10 seconds. Dish will perform a 360 degree scan for satellite. When signal strength appears on tv, press ANY BUTTON to stop dish from rotating.
7.Press the UP, DOWN, RIGHT or LEFT arrows to fine tune signal strength to the highest possible number on tv signal meter screen.
Page 4
