Eclipse - Fujitsu Ten 316SW ④Phase select switch, ⑤Power switch, ⑥LINE IN terminal, － 8 －

ENGLISH

④Phase select switch

This switch is used to select the speaker phase.

The ambience of the sound being listened to may change when the position of this switch is changed.

The effects will change depending on the main speaker combination being used and on the setting-up environment, so listen to the sound being played back and select the switch setting that provides the most natural playback.

※When you change a switch , please make volume small for noise prevention.

⑤Power switch

This switch turns the power on and off.

⑥LINE IN terminal

This terminal is used to input signals that are output from the LINE OUT terminal of a sub- woofer (super woofer) of an AV amplifier or directly from an amplifier.

⑦LINE OUT terminal

This terminal outputs the signals that are input to the terminal in 6. above.

It can be used when another unit or 508PA connected to this unit. (The volume adjustment knob of this unit will not work for both units.)

⑧Power input terminal

This terminal is used to connect the unit via the attachment power cord to a 230 V household electrical outlet.

－ 8 －