Eclipse - Fujitsu Ten HDR105, AVX5000, CH3083 Point Source Series Speakers, SA8394, SA8364, SA8374

Point Source Series Speakers

3-Way SA-Series with CTA (Compound Tweeter Array)

ECLIPSE SA-Series speakers are point source 3-way speaker systems with the woofer, midrange and high-frequency components all in the same axis for focused sound dispersion. The addition of time alignment enhances all the advantages of a true point source.

Enhanced clarity with the Compound Tweeter Array (CTA)

The Compound Tweeter Array (CTA) comprises a large diameter soft dome midrange/tweeter driver that crosses over from the woofer at 3kHz or 3.5kHz (depending on the SA-Series model) and handles frequencies up to 8kHz. A Super Tweeter takes over with a high-frequency response that goes all the way out past 40kHz. This makes for increased clarity but without extra brightness or glare. The CTA also enables better high frequency energy dispersion and substantially improves the speaker's off-axis response characteristics

Improved imaging with Time Alignment.

Crossover network

Each SA-Series speaker incorporates a computer- optimized crossover designed to maximize sonic purity and allow greater power handling with less distortion. ECLIPSE proprietary capacitors and quality components are utilized to ensure the three drivers produce a smooth, seamless sound.

	Neodymium Magnet
	Spider
	Midrange Aluminum
	Heat Sink
	Mid Steel Top Plate
	Strontium Magnet
Side view of SA8364	Mid Steel Bottom Plate

High-Bandwidth, High-

Dispersion Super Tweeter

High-Power, Low-

Distortion Laminated

Woofer

Soft Dome

Midrange Driver

A time-aligned speaker exhibits precise imaging with excellent phase coherency. SA speaker units position the woofer and soft dome midrange diaphragms axially on the same plane for symmetrical time and distance alignment. The woofer cone and midrange dome are also mechanically aligned for optimal phase coherency and imaging. The super tweeter is on a mount directly above the midrange dome that also acts as a phase plug.

Perfect for system expansion.

The SA Series is ideal for use alone as high- performance replacement speakers that instantly upgrade any in-car system. They are also perfect for use with other components to create extraordinary systems. Additional low frequency augmentation is easy using any of ECLIPSE's various subwoofers powered by dedicated subwoofer amplifiers.

• Easily fits stock speaker footprints

• Simple installation

• 3-Way time aligned point source design

• Aluminum voice coil former

SA8394

6 ⋅ 9˝ 3-Way Point Source with CTA

•Continuous Power Handling: 85W

•Music Power Handling: 250W

SA8364

6-1/2˝ 3-Way Point Source with CTA

•Continuous Power Handling: 50W

•Music Power Handling: 150W

SA8374

5 ⋅ 7˝ 3-Way Point Source with CTA

•Continuous Power Handling: 50W

•Music Power Handling: 150W

• CTA (Compound Tweeter Array) for response to 40kHz

• 12dB/octave crossover

• Midrange/tweeter protective circuit

• Wide frequency response

• Protective grille

	SA8394	SA8374	SA8364
Size	6 ⋅ 9˝	5 ⋅ 7˝	6-1/2˝
Frequency Response	40 — 40,000Hz	52 — 40,000Hz	82 — 40,000Hz
Santoprene Surround	●	●	●
Laminated Mica-filled Polypropylene Cones	●	●	●
Ferro-Fluid Cooled Soft Dome Midrange Driver	●	●	●
Ferro-Fluid Cooled Super Tweeter	●	●	●
Midrange/Tweeter Protection	●	●	●
Mounting Depth	3-3/8˝	2-9/16˝	2-1/4˝
Grill or Adaptor	Grill + Spacer	Grill + Spacer	Grill + Spacer

48