Ecom Instruments 40, 50 We ecom Instruments GmbH Industriestraße D-97959 Assamstadt, 94/9/EC

We

ecom Instruments GmbH

Industriestraße 2

D-97959 Assamstadt

declare under our sole responsibility that the product

Ex-Time 40 / Ex-Time 50

to which this declaration relates is in accordance with the provision of the fol- lowing directives

94/9/EC	Equipment and protective systems
	intended for use in potentially
	explosive atmospheres

and is in conformity with the following standards or other normative documents

EN 50014:1997 Electrical apparatus for potentially explosive atmospheres General requirements

EN 50020:1994 Electrical apparatus for potentially explosive atmospheres Intrinsic safety "i”

ecom Instruments GmbH, Assamstadt, den 09.11.01

12. EC Type Examination Certificate

Physikalisch-Technische Bundesanstalt Braunschweig und Berlin

(1)EC-Type-Examination Certificate

(2)Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres – Directive 94/9/EC

(3)EC-Type-Examination Certificate Number PTB 02 ATEX 2197 X

(4)Device: Explosion-proof Wall Clock, type Ex-time **

(5)Manufacturer: ecom instruments GmbH

(6)Address: Industriestrasse 2, 97959 Assamstadt, Germany

(7)The design of this device and any acceptable variation thereto are specified in the schedule to this certificate and the documents therein referred to.

(8)The Physikalisch-Technische Bundesanstalt, notified body No. 0102 in accordance with Article 9 of the European Community Council Directive of

March 23, 1994 (94/9/EC), certifies that this device has been found to

comply with the Essential Health and Safety Requirements relating to the design and construction of equipment and protective systems intended for use in potentially explosive atmospheres, given in Annex II to the directive.

The examination and test results are recorded in the confidential report PTB Ex 02-22330.

(9)Compliance with the Essential Health and Safety Requirements has been assured by compliance with

EN 50014:1997 + A1 + A2 EN 50020: 1994

(10)If there is an "X” after the certificate number, special conditions for the safe use of the device are provided in the schedule to this certificate.

(11)This EC-Type-Examination Certificate relates only to the design and examination of the specified device in accordance with Directive 94/9/EC. Further requirements of this directive apply to the manufacture and supply of the device. These requirements are not covered by this certificate.

(12)The labeling of this device must include the following information:

II 2 G EEx ia IIC T4

(13)S c h e d u l e

20 21