Eddie Bauer 22-750 Restraint and push down, Firmly while pulling up on, Loop to tighten belt

4358-3410D Alpha 5pt 1/26/06 11:39 AM Page 41

5	Place one knee in the child
	restraint and push down
	firmly while pulling up on
	the loop to tighten belt.
6	With knee still in child
	restraint, attach hook to
	anchor in vehicle. Push
	down firmly and tighten
	top anchorage strap.

To adjust top anchorage

strap: See “Adjusting Top Anchorage Strap” section.

8

After checking for hot seat and buckles, place your child in the child restraint as described in the “Securing Your Child in the Child Restraint” section.

To remove LATCH: Push in on release button and pull LATCH adjuster

Forward-Facing Use: 22-40 lbs. (10.1-18 kg), 34-

7

With weakest hand at belt path, tilt and push the child restraint forward and back, and from side to side. If the LATCH belts do not loosen, your child restraint should be secure.

NOTE: Some “play” from front to back or about an inch from side to side is acceptable.

away from child restraint to loosen. Unhook LATCH hooks.

43” (85.1-110 cm), Over 1 year

If the child restraint does not remain tight, do not use the child restraint in this seating location with this LATCH system.

!WARNING

LATCH hooks MUST be securely fastened. Failure to do this can result in serious injury or death.

of age.

38 39