Connecting the USB Hard Drive to an IBM
Connecting the USB Hard Drive to an IBM
Note: The following steps
1.Turn off the power to your USB hard drive.
2.Turn on the power to your computer.
3.Insert the power cable plug into the DC IN input connector on the rear panel of the USB hard drive (Figure 4 and Figure 5).
DC IN power input
power cable plug
Step 3
USB 2.0 port
USB 2.0 cable plug
Step 7
Figure 4. Connecting USB and Power Cables to External USB Hard Drive
4.Insert the power cable’s female connector into the AC power adapter block (Figure 5 on page 6).
5.Plug the other end of the power cable into an AC outlet (Figure 5 on page 6).
TEAC USB Hard Drive Installation Guide | 5 |