EdgeStar AP14000HS manual Maintenance, Wipe with a soft dry cloth, Clean as follows

Maintenance

Turn off the appliance first before disconnecting from the power supply.

Wipe with a soft dry cloth.

Use lukewarm water (below 104˚F) to clean the appliance.

Never spray water onto the main unit.

It is necessary to clean or replace the air filters periodically.

Clean as follows:

Stopthe appliance and remove the activated carbon filter and the pre-filter.

The activated carbon filter attaches to the standard pre-filter. The activated carbon filter removes smoke, odors and other harmful particles, while the pre-filter removes dust.

Clean and reinstall the pre-filter

Dirt can be cleaned off the pre-filter by washing it with a solution of soap in lukewarm water. After cleaning the pre-filter, allow it to air dry in shaded and cool place, then reinstall. Clean the pre-filter

every two weeks if the air conditioner operates in a dusty environment.

Replace the activated carbon filter

The activated carbon filter can notbe cleaned and needs to be disposed of when cleaning the

pre-filter. EdgeStar sells replacement activated carbon filters. Contact customer service via email at service@edgestar.com or by telephone at

1-866-319-5473 to purchase additional activated carbon filters.

Maintenance and Storage

1.If you are not going to use this unit for a long time, be sure to drain the water from the reservoir by removing the drain cap and the rubber plug.

2.Before storing the unit, run it in fan mode for a few hours to dry any moisture on the coils to prevent mold.

3.Turn the unit off, clean the air filter and reinstall it.

4.Remove the exhaust hose and connectors and keep them in a safe place.