If this light is flashing, the internal condensate tank is full and the unit has shut itself off. Empty the tank to restart the unit. See the Drainage section for more information on performing this operation.
Buttons |
|
| |
1. | “TEMP. UP” | = | Adjusts Temperature Up |
| This button raises the thermostat temperature setting. It only affects the operation | ||
| of the unit in Cooling mode. |
| |
2. | “TEMP. DOWN” | = | Adjusts Temperature Down |
| This button lowers the thermostat temperature setting. It only affects the operation | ||
| of the unit in Cooling mode. |
| |
3. | “SPEED” | = | Adjusts Fan Speed |
| Press this button to adjust the fan speed between High and Low settings. | ||
4. | “MODE” | = | Toggles Modes |
| Press this button to switch between modes- Auto, Cooling, or Fan. | ||
5. | “TIMER” | = | Turns Timer On/Off |
| Press this button to activate the timer. Each time you press this button, a time will | ||
| appear in the LED display (from 1 to 12 hours). The timer can be used to turn the | ||
| unit on or off. |
|
|
| To turn the unit on using the timer, make sure the unit is off. Press the “TIMER” | ||
| button until the desired number of hours appears in the LED display. After the | ||
| number of hours you selected elapses, the unit will turn on. | ||
| To turn the unit off using the timer, make sure the unit is on and operating as you | ||
| want it to. Press the “TIMER” button until the desired number of hours appears in | ||
| the LED display. After the number of hours you selected elapses, the unit will | ||
| turn off. |
|
|
6. | “ON/OFF” | = | Turns Unit On/Off |
Press this button to turn the unit on and off.
Remote Control
Setting up the remote control
1.Remove the cover from the back of the remote control.
2.Insert 2 AAA batteries.
3.Point the remote control at the portable air conditioner (make sure the air conditioner is plugged in) and press the button for the operation that you want.
Notes:
Point the remote control at the portable air conditioner when you are using the remote. The remote control sensor is located under the little red square on the top of the portable air conditioner.
When the remote control is used to change most settings on the portable air conditioner, the portable air conditioner will emit a beep.
The maximum range for the remote control is 13 feet.
Remove the batteries from the remote control if you are not going to use it for several weeks or more.
13
