Temperature Control
Front panel controls
Please note that the front panel controls will allow you to change the temperature to a range that is higher and lower than
Light Button | LCD Display |
Up and Down Buttons
Using the controls:
Use the left side controls to adjust the temperature. The temperature displayed will be in Fahrenheit. This wine cooler has an actual temperature range from 50°F to 56°F. Whether your wine cooler can reach the actual set temperature depends on the ambient environmental conditions.
Press the button on the left side of the control panel to lower the temperature by 1 degree increments. The set temperature will flash for a few seconds, and then revert to the ambient inner temperature of the wine cooler.
Allow at least 24 hours for the temperature to acclimate, and before storing your wines.
Press the button on the left side of the control panel to increase the temperature by 1 degree increments.
Press the button to turn on and off the inner light.
When the temperature of the unit becomes too low, the LED will display “LL”, likewise, when the temperature is too high, it will display “HH”. The unit will display “ER” in the event of an error or power disruption.
Tip: To conserve energy, always set the display above 48; otherwise, the inner fans will run continuously.
Note: The right side controls will have little or no bearing on the inner temperature. It is recommended you set the right LCD at 55.
Important Note: This unit will operate best in a room with a temperature less than 90°F (32°C).
6