EdgeStar EAC420 manual Maintenance

Models: EAC420

1 5
Download 5 pages 36.66 Kb
Page 3
Image 3

5.DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit as this may void the warranty.

6.Check the household voltage to ensure it matches the appliance’s rate specification.

7.DO NOT cover the air inlet or outlet.

8.Always unplug the product before refilling the water tank.

9.Always unplug the product when not in use. To disconnect from the power supply, grip the plug and pull it from the power socket. Never pull by the plug out by the cord.

10.This product is not intended for use in wet or damp locations. Never locate the product where it may fall into a bathtub or other water container. DO NOT use in bathrooms or outdoors. When not in use always store in a dry area.

11.DO NOT run the power cord under carpeting or cover with rugs or runners. Keep the cord away from areas where it may be tripped over.

12.Avoid the use of an extension cord.

13.DO NOT insert or allow objects to enter any ventilation or exhaust opening as this may damage the product and could cause an electrical shock or fire.

14.DO NOT use the product in areas near gasoline, paint, or other inflammable goods or objects.

15.If the supply cord is damaged it must be replaced by the manufacturer or an authorized service center.

16.Unplug or disconnect the appliance from the power before servicing and cleaning.

MAINTENANCE

Before you clean the appliance, switch it off, remove the plug from the power socket and wait until the product has cooled down.

Use a damp cloth to clean the product housing.

Do not use water, detergents, abrasive cleaning liquids or chemical agents (e.g., Alcohol, Gasoline etc…) to clean the appliance.

Store the unit in its original packaging in a dry, dust free area during the off season.

2

7

Page 3
Image 3
EdgeStar EAC420 manual Maintenance