Power

Operation

Display

Remote Control Sensor

Mode Light

Water Light

 

Power

Mode

WATER

Water

Power

 

Power

The power button turns the unit on and off.

When you first press the power button, the unit will begin to operate in cooling mode. After you have used the unit, and turned it off, it will default to the last used mode/settings upon turning the unit on again.

If power to the unit is interrupted while the unit is running, the air conditioner will restart itself in its last used

mode/settings once power is restored.

Note: This "auto restart" function will restart the unit after power is restored. The compressor will resume after 3 minutes, if in use.

Water Light

This portable air conditioner is designed to exhaust most or all water condensed from the air (in cooling mode). In high humidity situations, the internal water reservoir may fill. The unit will automatically shut off and the water light will turn on. Once the water is manually drained, the unit will operate as normal.

Display

The unit will display the ambient room temperature while in operation.

Use the up “▲” and down “▼” buttons on the remote to change the set temperature (cooling mode only).

In cooling mode, once you have set the temperature, the display will indicate your set temperature for 5 seconds then revert back to displaying the ambient temperature.

After setting the timer, the indicator will blink 5 times before reverting back to displaying the ambient

temperature.

Note: the displayed range of the ambient temperature is from 32°F to 122°F. Any temperature above 122° F will be displayed as “HI” on the indicator, and any temperature below 32°F will be displayed as “LO.”

Mode Light

The light on the display panel on the portable air conditioner changes color to indicate the mode.

Blue: When the display panel is blue, the cooling mode is in use.

Orange: When the display panel is orange, the dehumidifying mode is in use.

Green: When the display panel is green, the fan mode is in use.

Note: After turning the air conditioner off, wait 3 minutes before turning it back on again.

Page 6
Image 6
EdgeStar PAC8000S owner manual Operation, Mode, Water, Power, The power button turns the unit on and off