Edifier Enterprises Canada R501 Specifications, Troubleshooting, RMS 6 W x 4 + 8 W +30 W, 20K Ohm

Models: R501

1 5
Download 5 pages 37.83 Kb
Page 5
Image 5
Specifications

Specifications

Total Power Output :

RMS 6 W x 4 + 8 W +30 W

Input Impedance:

20K Ohm

Input Sensitive:

450 mV

Frequency Response:

35 Hz ~ 20 KHz

Dimension(Subwoofer):

292(W) x 295(H) x 410(D)mm

Dimension(Satellite):

105(W) x 193(H) x 130(D)mm

Gross Weight:

About 17 Kg

Troubleshooting

No sound:

Are power, input, speaker cables and connectors all attached and seated? Is soundcard properly installed and functioning?

Is appropriate software properly installed and operating?

Is computer's sound (control panel) volume turned up?

One or more speakers have no or low sound level:

Are cables all connected properly?

Are connectors fully seated in soundcard, speakers or Y-adapter (for two-channel cards)? Are surround,Main and subwoofer level controls properly adjusted on Control Pod?

Are computer software settings adjusted for proper use?

Is computer system's sound (control panel) volume turned up?

Distortion or buzzing quality to total sound or subwoofer:

Turn down computer's sound (control panel) volume, and increase Control Pod volume. Turn down Subwoofer volume, as program signal may be too strong.

Noise or hiss; signal not loud enough with Main Volume turned up :

Turn up computer's sound (control panel) volume.

Turn down Main Volume on control Pod to compensate.

Appropriate software or hardware installed and operating?

Is this sound part of the program material being played?

Is software adjusted and set properly?

Computer Video Monitor Interference:

Is this Subwoofer too close to the computer monitor? Try 10 distance.

Are one or some of the satellite speakers too close to the computer monitor?

Page 5
Image 5
Edifier Enterprises Canada R501 Specifications, Troubleshooting, RMS 6 W x 4 + 8 W +30 W, 20K Ohm, 450 mV, 35 Hz ~ 20 KHz