Edimax Technology BR-6004 user manual Setup of WAN connections for this product, Power on

Figure 2-3 Setup of LAN connections for this product.

2.Setup WAN connection: prepare an Ethernet cable for connecting this product to your cable/xDSL modem or Ethernet backbone. Figure 2-4 illustrates the WAN connection.

Figure 2-4 Setup of WAN connections for this product.

3.Power on:

Connecting the power cord to power inlet and turning the power switch on, this product will automatically enter the self-test phase. When it is in the self-test phase, the indicators Ready and COM will be lighted ON for about 5 seconds, and then Ready and COM will be flashed 3 times to indicate that the self-test operation has

-8-