29
Figure 3-5
VeriP HY
VeriPHY Cable Diagnostics
User can perform cable diagnostics for all ports or selected ports to diagnose
any cable faults (short, open etc..) and feedback a distance to the fault.
¾ Cable Diagnostics: Cable diagnostics is performed on a per-port basis.
Select the port number from the drop-down list.
¾ Cable Status: Shows the cable length, operating conditions and isolates a
variety of common faults that can occur on Category 5 twisted pair cabling.
Figure 3-6
Ping
This command sends ICMP echo request packets to another node on the
network.
Ping Parameters
¾ Target IP Address: IP address of the host
¾ Count: Number of packets to send. (Range: 1-20)
¾ Time Out: setting the time period of host will be Ping
Use the ping command to see if another site on the network can be reached.