z The Software reset: which determines whether
or not to reset the PrintSir.
z The Restore to factory default: which
determines whether or not to erase all of the
PrintSir’s setting and restore to the default
configuration the PrintSir had when it was
shipped from the factory.
z The Print diagnostic page: which determines
whether or not to print a diagnostic page to a
attached printer connected at either LPT1,
LPT2 or LPT3 of the PrintSir. This feature can
be used to test the PrintSir to make sure it is
operating properly, or to isolate any
installation problems.
z The Do it button: do the action specified in the
above.
105