Edimax Technology Rackmount Fast Ethernet Switch English. ,

English.

This device is a powerful, high-performance Fast Ethernet

switch, with all ports capable of 10 or 100Mbps auto-negotiation

operation (NWay), which means this switch could automatically

negotiate with the connected partners on the network speed and

duplex mode. It is ideal for micro-segmenting large networks into

smaller, connected subnets for improved performance, enabling

the bandwidth demanding multimedia and imaging applications.

Moreover, the 10/100Mbps auto-sensing ability provides an

easy way to migrate 10Mbps to 100Mbps network with no pain.

Compared to the shared 10Mbps or 100Mbps networks, the

switch delivers a dedicated 10/100Mbps connection to every

attached client with no bandwidth congestion issue. This switch

also supports auto MDI / MDI-X function; each port could be

used to connect to another switch or hub with no crossover

RJ-45 cable.

Store-and-forward switching mode promises the low latency

plus eliminates all the network errors, including runt and CRC

error packets. To work under full-duplex mode, transmission and

reception of the frames can occur simultaneously without

causing collisions as well as double the network bandwidth.

The switch is plug-n-play without any software to configure and

also fully compliant with all kinds of network protocols. Moreover,

the rich diagnostic LEDs on the front-panel can provide the

operating status of individual port and whole system.

Before you start to install the switch, check the following

contents in this package：

z One Rackmount Fast Ethernet Switch

z One power cord and one user’s manual

z Rack-mount brackets and screws