High-Speed USB2.0 PCI Card
Driver installation
Windows 2000, XP, and 2003:
The system will automatically detect USB 2.0 PCI Card and install driver by itself under Windows 2003, XP, and 2000 operation systems .
Right click your mouse on "My Computer" and select "Properties" to check your operation system service pack version as below pictures shown. If your operation
system is NOT Microsoft Windows 2000 service pack 4 and Windows XP service pack 1 or later. Please visit Microsoft web site (http://www.microsoft.com) or use update function on your system to upgrade the latest version service pack of operation system.
Otherwise this USB2.0 PCI card just only run USB1.1 data transfer speed.
Windows 98SE and ME:
1.Please make sure this PCI card has been plugged into the PCI slot.
2.System will detect the new hardware, and please ignore it.
Insert the CD driver into the
:\USB\USB2.0-VIA\DRIVER\Setup.exe
※When the process of installing USB driver, system would ask your original operation system CD.
3.Then this Setup program will install the driver automatically. After installing driver Successfully, press "Finish" to end driver installation procedure and Reboot the system.
4.After restarting , open the Device Manager and check if the devices can work properly.
Start > Controller Panel > System > Device Manager
Note :
If there is a yellow exclamation mark on "VIA USB Universal Open
Host Controller", please remove this item from the Device Manager
by clicking the Uninstall button and click Refresh to re
driver again.
Please visit chipset vendor ~ VIA web site (http://www.via.com.tw) to get the latest driver.