ParameterDescription
Enable Port Forwarding | Enable Port Forwarding | |
Private IP | This is the private IP of the server behind the | |
| NAT firewall. |
|
| Note: You need to give your LAN PC clients a | |
| fixed/static IP address for Port Forwarding to | |
| work properly. | |
Type | This is the protocol type to be forwarded. You | |
| can choose to forward “TCP” or “UDP” packets | |
| only or select “both” to forward both “TCP” and | |
| “UDP” packets. | |
Port Range | The range of ports to be forward to the private | |
| IP. |
|
Comment | The description of this setting. | |
Add Port Forwarding | Fill in the "Private IP", “Type”, “Port Range” | |
| and | "Comment" of the setting to be |
| added and then click "Add". Then this Port | |
| Forwarding setting will be added into the | |
"Current Port Forwarding Table" below. If you find any typo before adding it and want to
55
