Edimax Technology Wireless Broadband Router manual Example Special Applications

	Select an application from the Popular
	Applications selection. Once you have
	selected an application, select a location (1-
	10) in the Copy to selection box and then
	click the Copy to button. This will
	automatically list the Public Ports required for
	this popular application in the location (1-10)
	you’d specified.
Add Special Application	Fill in the "Trigger Port", "Trigger Type”,
	“Public Port”, "Public Type", "Public Port" and
	"Comment" of the setting to be added and
	then click "Add". Then this Special Application
	setting will be added into the "Current
	Trigger-Port Table" below. If you find any typo
	before adding it and want to retype again, just
	click "Clear" and the fields will be cleared.
	If you want to add a popular application,
	select one “Popular Application” and then
	click “Add”.

Remove Special Application If you want to remove some Special Application settings from the " Current Trigger-Port Table", select the Special Application settings you want to remove in the table and then click "Delete Selected". If you want remove all Special Appliacation settings from the table, just click "Delete All" button. Click "Reset" will clear your current selections.

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

Example: Special Applications

If you need to run applications that require multiple connections, then specify the port (outbound) normally associated with that application in the "Trigger Port" field. Then select the protocol type (TCP or UDP) and enter the public ports associated with the trigger port to open them up for inbound traffic.

Example:

60