Edirol FA-101 , 16., 15., 14., 13., 12., 11., 10.,

31
Software settings
fig.sonar-2.eps
8.
Click the Drivers tab.
In the lists of Input Drivers and Output Drivers , click the following
devices to highlight them (white characters on blue background),
and un-highlight all other devices. Click [OK] .
9. Restart SONAR, and from SONAR's Options menu, choose Audio to open the Audio Options dialog box.
fig.sonar-1b.eps
10.
In the General tab, make sure that Playback Timing Master is set
to EDIROL FA-101 OUT , and Record Timing Master is set to
EDIROLA FA-101 IN .
fig.sonar-3.eps
11.
Click the Driver Profiles tab.
Select EDIROL FA-101 (5 in, 5 out) as the setting for “Show
Profile for,” and then select “32 bit PCM, left-justified” as the
setting for “Stream > 16 bit data as.”
12.
Click [OK] to close the Audio Options dialog box.
fig.sonar-5.eps
13.
From SONAR’s Options menu, choose MIDI Devices to open the
MIDI Devices dialog box.
14.
In the MIDI Devices dialog box, choose the FA-101 in the Inputs
area and the Outputs area.
15.
Restart SONAR.
16.
Open the Audio Options dialog box once again as described in step 2.
Verify that the audio device settings are correct.
Input devices Output devices
EDIROL FA-101 In 1 EDIROL FA-101 Out 1
EDIROL FA-101 In 2 EDIROL FA-101 Out 2
EDIROL FA-101 In 3 EDIROL FA-101 Out 3
EDIROL FA-101 In 4 EDIROL FA-101 Out 4
EDIROL FA-101 In 5 EDIROL FA-101 Out 5
FA-101_e.book 31ページ ２００５年１１月２４日 木曜日 午後１時２５分