Edirol PC-50 VALUE ENCODER (Keyboard: 5)

66
System settings
You can assign a specific parameter to the VALUE encoder.
* The VALUE encoder setting is valid only in the CONTROLLER mode of PLAY mode (p. 41).
Perform steps 1–3 (p. 61).
4. Use the VALUE encoder or the keyboard to specify VALUE ENCODER.
VALUE ENCODER (Keyboard: 5)
■Specified parameters
The PC-50 lets you assign a specific parameter to the VALUE encoder so that the value of that
parameter will be transmitted when you operate the VALUE encoder.
■To transmit the value of a specific parameter
If you’re in CONTROLLER mode (p. 50), operating the VALUE encoder will transmit the value of a specific
parameter.
Transmitting the value of a specific parameter (p. 60)
PC-50_e.book 66 ページ ２００５年１１月１０日 木曜日 午前１０時３３分