29
Installation and settings (Macintosh)
In order to use the PC-80, you’ll need to install both the driver and the PC-80
software synthesizer.
When you use the following procedure to install the software, both the driver
and the PC-80 software synthesizer will be installed in your Macintosh.
If the
“Authenticate”
dialog box appears during the installation, input
the password and click
“OK.”
1
Log on as the user who will be using the PC-80.
2
Disconnect all USB cables other than those for your keyboard and mouse,
and restart your Macintosh.
3
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
4
In the
Driver
folder of the CD-ROM, double-click
PC80USBDriver.pkg
.
* A message such as
“This Installer package needs to...”
may appear.
Click
“Continue.”
5
The display will indicate
“Welcome to the EDIROL PC-80 Driver
Installer.”
Click
[Continue]
.
6
The display will indicate
“Select a Destination.”
Click the drive in which the operating system is installed to select it, and then
click
[Continue]
.
7
The display will indicate
“Easy Install.”
Click
[Install]
or
[Upgrade]
.
8
The display will indicate
“Installing this software requires you to restart
your computer when the installation is done.”
Click
[Continue Installation]
.
9
The display will indicate
“The software was successfully installed.”
Click
[Restart]
to restart your computer.
Installing
If you will be using the PC-
80 as a different user, you
must log in as that user
and reinstall the software.
What you actually see on
your computer screen may
b
e different, depending on
your computing
environment and the
operating system you’re
using.
Select your startup disk as
the drive.
This completes installation of the PC-80 driver and the PC-80 software
synthesizer.
Now, let’s try starting up the PC-80 software synthesizer.
(➔“Starting up the PC-80 software synthesizer” (p. 30))
PC-80_e.book 29 ページ ２００５年１１月１０日 木曜日 午前１１時３４分